เท่าที่พยายามซูมดูรูป Stop code น่าจะเป็นตัวนี้นะครับ 0x00000063
Error Message:
STOP: 0x00000063 (parameter, parameter, parameter, parameter) SECURITY1_INITIALIZATION_FAILED
Explanation:
This is a Windows 2000 Executive character-mode STOP message. Phase 1 security initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.
User Action:
If this is the first time you have booted after installing new hardware, remove the hardware and boot again. Check the Microsoft Hardware Compatibility List to verify that the hardware and its drivers are compatible with Windows 2000. For information about the hardware, contact the supplier. If you are installing Windows 2000 for the first time, check the Windows 2000 system requirements, including the amount of RAM and disk space required to load the operating system. Also, check the Hardware Compatibility List to verify that the system can run Windows 2000. If Windows 2000 is loaded and no new hardware has been installed, reboot with recovery options set to create a dump file. If the message continues to appear, select the Last Known Good option when you reboot. If there is no Last Known Good configuration, try using the Emergency Repair Disk. If you do not have an Emergency Repair Disk, contact your technical support group.
จาก :
http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/w2000Msgs/1204.mspx?mfr=true
